[meteorite-list] List of known Rusters?

[Ed Majden]

Hi Jonathan:
	I did a search for D96 Gun Oil on the internet.  I contacted the  
supplier of this product and he says they will not ship small amounts  
to Canada.
He referred me to some Canadian Dealers but they did not reply to my e- 
mails.  Perhaps they don't stock the stuff anymore.  Shipping stuff  
like this across
the border can be problematic and also costly.  I phoned a gun  
collector friend of mine and he says they don't use gun oil anymore,  
just cloth impregnated
wipes.  He says in our cold climate when hunting seasons are open gun  
oils tend to gum things up.  He suggested using clear paste wax, auto  
or floor types.
I wonder if anyone has tried this?  This may be worth a try!
Cheers:
Ed

 From very "WET" Vancouver Island!

On 7-Dec-10, at 10:59 PM, Jonathan E. Dongell wrote:

> Ed,
> I will sometimes use WD40 on previously treated/preserved irons, as  
> a twice-a-year
> cleaner/sealer as a "rub-down" with a clean towel. But, I always  
> heat my specimens
> to ~ 400 F for ~ 20 minutes, prior to every application (let them  
> cool first... ouch...).
> I have noticed two things when using WD40 on my specimens:
> 1. it appears to be, at best, only a temporary rust retardant.
> 2. it does not behave as a 100% water-repellant oil-based product  
> does; in fact,
> it can (in my opinion) emulsify with water/moisture in the specimen,  
> due to the aliphatic
> component and/or the wetting agent used in WD40.
>
> The later # 2, is why I always insist on heating specimens that  
> receive WD40. You must
> remove any moisture from within your specimen, or you will risk  
> continued degradation
> of your specimen BENEATH THE SURFACE over time (in my opinion).
>
> The only other reason I might use WD40 is a personal preference. It  
> gives certain irons
> a slightly darker, almost black-iron oxide or 'fusion-crust' tone or  
> coloration (instead of
> a shiny, or a gun metal blue, or etc...) with continued usage.  
> However, this same look,
> is why some collectors DON'T like to use WD40.
>
> That said, I would never use WD40 on a "severe ruster". There are  
> much better products
> (many have already been named on this listing) for retarding rust.  
> But, NEVER apply any
> of these products (in my opinion) to a specimen (especially a  
> 'severe ruster') until you:
> 1. remove as much of the alkalis and/or salts as is possible from  
> specimen
> 2. remove as much ferric oxide as is possible, or convert as much  
> ferric oxide to
> ferrous oxide (via chemical or electrico-chemical treatment) as is  
> possible
> 3. apply either a chemical or an electrico-chemical treatment  
> process to stabilize
> other minerals/metals (when necessary).
> 4. remove as much (better yet, all) moisture as is possible from  
> specimen.
>
> ONLY THEN should you apply your rust prevention product of choice.  
> Remember,
> these specimens are rusting for a reason. Most severe rusters have  
> come from
> severe (sometimes anaerobic) environments. You must remove all the  
> above rust
> 'contributing causes' prior to sealing any of these types of  
> specimen (my opinion).
>
> Skipping any of the above steps, and applying a rust preventative,  
> will surely "lock in"
> these potential 'rust mechanisms' within your specimen, which in  
> fact, will create a
> more corrosive condition, and hasten the demise of your specimens.
>
> One last note...
> I continue to waiver on this one...
> Whether it is nobler to preserve the original specimen's "as is"  
> qualities,
> or is it nobler still, to preserve the specimen from deteriorating  
> away,
> thus altering forever, the "as is" quality. Alas, there is the  
> rub.....
>
> Just my opinions... Best of Luck  ;>}
> Jonathan Dongell
> IMCA 3922
>
>
>
> ----- Original Message ----- From: "Ed Majden" <epmajden at shaw.ca>
> To: <meteorite-list at meteoritecentral.com>
> Sent: Monday, December 06, 2010 9:28 AM
> Subject: [meteorite-list] List of known Rusters?
>
>
>> Does anyone have a list of known Iron meteorite rusters?  The  
>> sample  of Nantan China I have split into several pieces.  I have  
>> been using  WD40 on the pieces to retard further problems but this  
>> does not work  all that well.  Have to repeat this every few weeks!
>> Ed Majden
>> Courtenay B.C.
>>
>> Asteroid Majden  142368   (Thanks to Rob Matson)
>> ______________________________________________
>> Visit the Archives at http://www.meteoritecentral.com/mailing-list-archives.html
>> Meteorite-list mailing list
>> Meteorite-list at meteoritecentral.com
>> http://six.pairlist.net/mailman/listinfo/meteorite-list
>