[DogParkList] digital modes - slightly OT
Tod Glenn
n7wd at cordite.com
Thu Jan 18 00:32:42 EST 2007
I am another cocoamodem user, after using MultiMode for a while. The
PSK31 interface in Cocoa is much better.
I am using it with my macbook and a TenTec Omni VI. No interface
required other than 2 RCA to 3.5mm cables plugges into speaker and
mic, and AFD in and AF out. PTT is controlled via VOX. Sweet!
Tod
On Jan 17, 2007, at 10:21 PM, Craig Gaevert wrote:
> Information presented here is useful but since I see the Signal
> Link SL1+ mentioned, I have to ask: presumably those of you that
> have this piece of hardware have gotten it to work. I have one and
> have hooked it up and have played with it to no avail. I can
> barely make the PTT idiot light light up with full audio, and I am
> not sure whether it is a setting in the box or what? It's sitting
> on the shelf waiting for when I have a little more time to tinker,
> but any suggestions would be appreciated.
>
> Craig
> K6XLT
> Santa Rosa, CA
>
>
> On Jan 17, 2007, at 11:48 AM, David Ferrington wrote:
>
>> I’ve been looking (but not yet using) coccaModem – I’m waiting for
>> a microHam USB DIGI KEYER to arrive.
>>
>> There are Applescripts to interface it to MLDX
>>
>> coccaModem (http://homepage.mac.com/chen/cocoaModemPage) is free,
>> it will work with SignalLink, but I thought I’d buy the all in one
>> from microHam.
>>
>> At this point I can’t comment more on either one, I’m pretty much
>> in the same position as you. I will say that Kok Chen (W7AY) who
>> wrote coccaModem is very helpful.
>>
>>
>> On 17/1/07 16:37, "EZRhino" <EZRhino at fastmovers.biz> sent:
>>
>>> Hello group,
>>>
>>> Wondering if I can get some feedback on what kind of software and
>>> interfaces you are using for digital modes? I am looking into
>>> "Mulitimode"
>>> by Black Cat systems, ( http://www.blackcatsystems.com/software/
>>> multimode.html ) and Signal Link SL1+ interface ( http://
>>> www.tigertronics.com/sl+main.htm#Part%20Numbers%20&%20Options
>>> <http://www.tigertronics.com/sl+main.htm#Part%20Numbers%20&%
>>> 20Options> : ). I haven't made up my mind yet, but these look
>>> descent and probably the most economical way to go.
>>>
>>> Also I was wondering if MLDX works with the above....in other
>>> words, I still type the other station's call sign into MLDX like
>>> normal, and the band/freq/mode info will be automatically filled
>>> in as if on SSB, right?
>>>
>>> Chris
>>> KF7P
>>
>> --
>> I have never met a man so ignorant that I couldn't learn something
>> from
>> him. -Galileo Galilei, physicist and astronomer (1564-1642)
>
> _______________________________________________
> DogParkList mailing list
> DogParkList at dogparksoftware.com
> http://two.pairlist.net/mailman/listinfo/dogparklist
----
Tod Glenn
N7WD
SKCC #1444
ARCI #12420
FISTS #12134
NAQCC #1283
n7wd at cordite.com
More information about the DogParkList
mailing list