[DogParkList] MicroHAM FTDI driver problem
Jan Öhberg
sm7vvg@telia.com
Fri, 01 Oct 2004 10:38:47 +0200
You must drag the USB-device to the wast basket to "unplugg" it. If not
doing so the computer doesn't know that you have "unplugged" it.
Regards Jan SM7VVG
On 04-10-01 09.25, "Don Agro" <dagro@dogparksoftware.com> wrote:
> Hi Larry,
>
> On 30-Sep-04, at 11:30 PM, Larry West wrote:
>
>> I recently received a MicroHam IC13 USB controller to connect my Mac
>> with MacLoggerDX to my Icom IC-718. I'm having a problem getting the
>> proper drivers to load for the USB-serial interface.
>
> There is an issue with the OS X FTDI driver that requires one to unplug
> and re-plug the device after a reboot.
> FTDI blames Apple - but the Keyspan drivers don't seem to have the
> problem.
>
> FTDI has a rather complex workaround for this:
>
> <http://www.ftdichip.com/Files/
> FTDIUSBSerialDriver%20Installation%20Notes.rtf>
>
> ... but I find it easier to just unplug and replug the device after a
> reboot to force the USB controller to re-enumerate the FTDI device -
> then run the program that will be using the port.
>
>
> 73 Don Agro VE3VRW
>
> D o g P a r k S o f t w a r e L t d .
>
> email: dagro@dogparksoftware.com
> www: http://www.dogparksoftware.com
> iChat AV:dogpark@mac.com
>
> _______________________________________________
> DogParkList mailing list
> DogParkList@dogparksoftware.com
> http://two.pairlist.net/mailman/listinfo/dogparklist