[DogParkList] MacloggerDX
Don Agro
dagro@dogparksoftware.com
Fri, 2 Jan 2004 13:42:51 -0500
Hi Jonathan,
On Jan 2, 2004, at 12:37 PM, Jonathan Reed wrote:
> Hi,
>
> I've just started playing with data modes on my FT 817 and I am having
> problems with the communications side of MacloggerDX. I have the rig
> connected via Icom RS232 cable and Keyspan single high speed RS232 to
> USB adaptor and everything works fine I can control the rig and get
> the right info about modes. However when I select the digital mode
> from the buttons on the 817 Maclogger shows either CW(sometimes via
> RTTY) or FM and then switches the rig to the same! If you try and set
> the rig via Maclogger the same happens.
> Help!!!
>
> tia
>
> Jon M3ESX
Amongst the different radio manufacturers there is little agreement
beyond AM FM USB LSB and CW on mode names so that MacLoggerDX has to
find a list of mode names that can be used for all the rigs supported.
The FT-817 manual lists RTTY as the example mode used in "digital"
which is actually SSB based AFSK.
Currently MacLoggerDX interprets mode report 0ah (digital) as RTTY but
incorrectly resets that to 0x02 (CW) on the radio.
This has been fixed in this beta:
<ftp://dogparksoftware.com/MacLoggerDX3.9b2.sit>
I have removed the "FSK" option from the mode popup since it had the
same usage as "RTTY"
73 Don Agro VE3VRW
D o g P a r k S o f t w a r e L t d .
email: dagro@dogparksoftware.com
www: http://www.dogparksoftware.com
iChat AV:dogpark@mac.com