[meteorite-list] Fw: etching with radio shack etchant

[R N Hartman]

I was just browsing through some of the posts on Joes Skyrockcafe website 
when I ran across a post from a collector who was unhappy with the Radio 
Shack etchant for iron meteorites.  He claims to have sanded a Campo down to 
#400 but could not get a Widmanstatten pattern, although he did get a 
beautiful pattern using the traditional Nitric method.

My son, Jim, and I posted an article in the November 2002 issue of the 
Meteorite Times about preparing and etching irons using Ferric Chloride 
(which is the same material as used in the Radio Shack etchant).  The method 
has been used widely since that time with outstanding success by many and 
with superior results, so there is now an undisputed 8 year positive 
history.  Etches show more contrast and subtle details come out more 
readily, and fears of ferric chloride use have been put to rest as the 
specimens are not rusting and crumbling.  In fact, they do just as well if 
not better than when etched with nitric. (But that is a topic for another 
day.)

I think the problem of the person in posting his negative experience was 
that after grinding down to a #400 grit that he did not then polish out the 
surface.  Unlike preparing an iron to etch with nitric acid, the surface 
wants to have a highly reflective mirror-like surface before etching.  As we 
say in the article, however, every meteorite is different and can react 
differently to different circumstances, so he may have just had an unusual, 
but uncommon, experience.  He may have a very different experience with a 
different Campo.  (I have many Ferric-etched slices of Campos in my personal 
collection and they are all doing well.)

Ron Hartman 





E-mail message checked by Spyware Doctor (7.0.0.514)
Database version: 6.14900
http://www.pctools.com/en/spyware-doctor-antivirus/