AW: [meteorite-list] Water fun

[Martin Altmann]

How high was the cut loss?
Did you also try to cut irons?



-----Ursprüngliche Nachricht-----
Von: meteorite-list-bounces at meteoritecentral.com
[mailto:meteorite-list-bounces at meteoritecentral.com] Im Auftrag von
marcin at polandmet.com
Gesendet: Montag, 20. März 2006 16:25
An: meteorite-list at meteoritecentral.com
Betreff: [meteorite-list] Water fun

Grrr my 4th try......

Hi
As a person who like test new tortue techniques on meteorites I was very
happy when one private industrial factory purchased first in whole region
equipment to cut using high presure water.
Machinery was 1 month old and when I told them what I want try to cut 3/4 of
live personel come and watch cutting process. I take my 3kg SAU001 half
specimen to try cut it.
Cutting surface was 10cm long and 9cm high.

Ofcourse this is not the best way to cut stones, but I was very curious how
will look cut surface. I tell them to change cutting speed 3 times. They
start cut with 20mm/min and this was too fast, hen 5 and 10mm per minute.

Here is results
http://www.meteoryt.net/ebay/prefel1.jpg
http://www.meteoryt.net/ebay/prefel2.jpg
http://www.meteoryt.net/ebay/prefel3.jpg

Now Im looking only for laser and plasma cutting equipment to produce some
ataxites from my morasko :)

PS, anyone interested in water cutted slice of Sau001 307g ? :D

-----[ MARCIN CIMALA ]-----[ I.M.C.A.#3667 ]-----
http://www.Meteoryt.net             marcin at meteoryt.net
http://www.PolandMET.com       marcin at polandmet.com
http://www.Gao-Guenie.com      GSM +48(607)535 195
--------[ Member of Polish Meteoritical Society ]--------

______________________________________________
Meteorite-list mailing list
Meteorite-list at meteoritecentral.com
http://six.pairlist.net/mailman/listinfo/meteorite-list