[meteorite-list] meteor-wrong (most likely)

[stan .]

it cant be that simple, can it? there is a HUGE diffrence in the density of 
silicates and iron. how would you get a heterogenious mix of the two? it's 
not like you can just pour 50 kgs of iron into a crucible and stir it with a 
spoon - unless your spoon is made of tungsten and you are wearing an 
aluminized fireretardent suit i guess :)

>From: "Adam Hupe" <raremeteorites at comcast.net>
>To: <meteorite-list at meteoritecentral.com>
>Subject: Re: [meteorite-list] meteor-wrong (most likely)
>Date: Sun, 17 Jul 2005 16:43:00 -0700
>
>You can probably create something similar for about 10 cents a pound in a
>good furnace.  Notice that each main piece weighed about 48 kilograms, 
>about
>the same size that could be produced in a small crucible.  Heck, at $1.00 
>to
>$3.00 a gram this spells a tidy profit because production cost would be 
>less
>than 1 cent per gram. Maybe somebody with access to a furnace should 
>produce
>some more.  At this margin I would certainly invest.
>
>All the best,
>
>Adam
>
>
>
>
>
>----- Original Message -----
>From: "Meteoryt.net" <marcin at meteoryt.net>
>To: <meteorite-list at meteoritecentral.com>
>Sent: Sunday, July 17, 2005 4:27 PM
>Subject: Re: [meteorite-list] meteor-wrong (most likely)
>
>
> > > Cheap is a relative term. It is a lot cheaper now versus when it was
>first
> > sold as a new pallasite find. But since it is "cool" looking material 
>that
> > appears to be similar to a pallasite, it is still not $0.10/g or
> > less....like cheap chondrites and irons. Pricing is still in the $1 to 
>$3
> > per gram range. See the site below for pieces at $1.50/g.
> > > http://www.polandmet.com/
> >
> > Thanks
> > Someone can laugh that pallasite-wrong cost few times more than Brahin
> > pallasite(ebay curiosity), but there is just areound 3 importand 
>reassons
> > for this in my opinion:
> > First
> > Shirokovsky is verry stable. I personally in around 800g of slices find
>only
> > one with rust. This looked like accident in preparing this single slice.
> > Second,
> > Half of market success of Shirokovsky is this how this mineral was
>prepared.
> > Give us 1mm thin brahin slices with 90% transparent olivines, and I (and
>not
> > only me) pay more than for Shirokovsky.
> > Third
> > Its just cool looking thing, and we collecting cool things, so its
> > "must-have" specimen in our collections not mater if this is meteorite 
>or
> > not.
> >
> > Good night all
> >
> > -----[ MARCIN CIMALA ]-----[ I.M.C.A.#3667 ]-----
> > http://www.Meteoryt.net             marcin at meteoryt.net
> > http://www.PolandMET.com       marcin at polandmet.com
> > http://www.Gao-Guenie.com      GSM +48(607)535 195
> > --------[ Member of Polish Meteoritical Society ]--------
> >
> >
> > ______________________________________________
> > Meteorite-list mailing list
> > Meteorite-list at meteoritecentral.com
> > http://six.pairlist.net/mailman/listinfo/meteorite-list
>
>
>______________________________________________
>Meteorite-list mailing list
>Meteorite-list at meteoritecentral.com
>http://six.pairlist.net/mailman/listinfo/meteorite-list