[DogParkList] RFE - auto-increment freq

[David Ferrington, M0XDF]

Well, I guess the idea is, you pick a frequency and then just work  
your way up in increments from there.
The idea being you let MLDX do the dial tuning while you get on with  
reading something, if you hear something, you stop the scan and start  
working it. My noise floor is so high (s7-s9) that scanning invariably  
stops just because of a peak in the noise.

Unless I've missed something, in order to scan all frequencies from,  
say 3.600 to 3.800 MHz in 2kHz steps, I've go to enter those on into  
the memory list on the left, then drag them over to the scan list and  
'tick' the boxes, quite a lot of entering in order to get it to scan  
them.
-- 
There is a coherent plan in the universe,
though I don't know what it is a plan for.
                                             - Fred Hoyle

On 20 Dec 2009, at 17:56, Don Agro wrote:


> Hi David,

>

> On 2009-12-20, at 12:46 PM, David Ferrington, M0XDF wrote:

>

>> I saw an article from someone, who's logger will automatically  

>> increment the current freq by 2KHz every minute.  Wondered what Don  

>> and others thought of the idea, step and period  being configurable.

>

> What is for ? The Memory Panel will allow you to set up a list of  

> frequencies to scan.