[DogParkList] MicroHAM FTDI driver problem
Larry West
viggen@mac.com
Fri, 1 Oct 2004 23:37:25 -0400
Ya know, maybe I just missed it, but I just re-installed the driver
without the device plugged in, restarted, then plugged it in, and it's
now working like a charm. Started talking to the 718 right away.
Out of curiosity, does anyone know if you can run two radios off one of
these MicroHam devices? Using a splitter or something. I know the
converter ICOM sells supports up to 4 (I think) radios.
Anyway, time to start playing around with it...
Thanks!
Larry West
N2LJ
On Oct 1, 2004, at 03:25, Don Agro wrote:
> Hi Larry,
>
> On 30-Sep-04, at 11:30 PM, Larry West wrote:
>
>> I recently received a MicroHam IC13 USB controller to connect my Mac
>> with MacLoggerDX to my Icom IC-718. I'm having a problem getting the
>> proper drivers to load for the USB-serial interface.
>
> There is an issue with the OS X FTDI driver that requires one to
> unplug and re-plug the device after a reboot.
> FTDI blames Apple - but the Keyspan drivers don't seem to have the
> problem.
>
> FTDI has a rather complex workaround for this:
>
> <http://www.ftdichip.com/Files/
> FTDIUSBSerialDriver%20Installation%20Notes.rtf>
>
> ... but I find it easier to just unplug and replug the device after a
> reboot to force the USB controller to re-enumerate the FTDI device -
> then run the program that will be using the port.
>
>
> 73 Don Agro VE3VRW
>
> D o g P a r k S o f t w a r e L t d .
>
> email: dagro@dogparksoftware.com
> www: http://www.dogparksoftware.com
> iChat AV:dogpark@mac.com
>
>
Larry West